What Have I learned?

This post is more about my blog/website itself, and not just my car. Although there are some photo’s I have messed around with at the end (with a quick vote for fun), which I quite liked messing around with.

I’m asking for a little feedback to see to see if what I experienced was the ‘norm’ or not. Did I almost sell out? Did anybody notice?

A couple of weeks ago I was contacted by a marketing company about my site, they wanted to advertise on my pages. That company was “Infolinks”.

Now don’t get me wrong, they first sent me a nice email, where they asked if they could could book some time in with me to discuss a potentially good money making offer. All very professional and above board. I had to check for scams; were they legit, will it cost me anything?

I did my homework on them, all was good from what I could see. Promising start.

I responded back to agree to a meeting which was arranged via google calendar. Bang on time the next day I was called and we started to have a nice chat. He liked my site (I guessed that was standard patter), and saw a good potential to get me some extra money. They had even set a ‘budget aside ready for me’. With the average daily hits I was getting I was told that the advertising would get me $15 to $20 a day. That is a good amount to me for a niche audience like mine to be fair. That type of (proposed) money would come in handy to pay for my hosting, domain mapping and WordPress plan etc. I agreed to their proposals and within hours I was sent login details and everything I needed to get me going.

Setting it up was all straight forward enough, plugins and some little behind the scenes config and it was ready to rock. I decided I would try it for couple weeks straight and run their ads to see what the revenue would be like; in that time over 5,500 were ‘served’ on my unsuspecting readers and followers. After those two weeks I earnt a massive $3.21, that’s somewhat short of the $$ per day I was going to be getting. 🙁

I currently use WordPress ads and that pays for most of the hosting etc. I did check on my pages from a different IP Addresses to see what was going on. I didn’t like the intrusive load of ads from the start and thought it would settle down. It didn’t So I stopped it over the weekend.

My question to my fellow bloggers; did I get greedy or was I just naive and sold a story?

I learned that my readers and first time visitors experience of my pages is more important than a few cents. If I have to be a little out of pocket each year – then so be it. I’m Sorry if my temporary ads made my little ol’ blog unpleasant for you.

My Car Pictures:

OK, back to what I do know, my car. From the last show Culford I took a few pictures at the front of the building. I decided to have a little play around with some effects. It took me a while, but I learned just how easy it is to really mess up a good picture.

Here are my attempts at something arty, see what you think.

The original

Sepia

Artwork

Faded

Sepia with coloured Car

I decided to have a little poll to make it easier as I haven’t had a good ol’ vote for a while.

I have some amazing photo’s coming soon which I can’t wait to share with you, watch this space, hopefully at the weekend for a post. Although I have a car show Saturday + Sunday so not sure when I will get time to do it. This time last year I was scratching around for something to post about.

Share my Content

Most Revealing….

For a number of years since I started my blog I have keept my identity off the web. A little background as to why. My blog was intended to be a diary of the build progress of my Mustang and nothing much more. Somewhere to store my thoughts and photos if you like, my build diary. The posts back then had a little write up so I could read it through a number of years later. That little diary has evolved into something much more now, almost a website with lots to look at, obviously something I’m very pleased about. I now do reviews of car detailing, books, tools, memorabilia, collectables and articles. After a few early posts on the blog I started to get emails from people to say they enjoyed what I was doing. Thinking about what was happening I stepped up my game pretty quickly and started to create more how to guides, processes and instructions on what I had done or I was doing at the time. This of course was a view from a man on the street who had never done anything like restoring a classic car before. I made mistakes and they were corrected with the help of Mustang Maniac and all was well again. All of that hard work comes to a giddy height when I go to a car show. Late November 2019 I was invited to attend the “Lancaster insurance Pride of Ownership” at the Birmingham NEC. There was ten of us (finalists) there and I did a comprehensive write up of the show over the three days which it ran. The only downside was that it was marred by cheating of the winner which I proved and fully documented. All that aside there was some massive plus points about that show too; I meet some wonderful people, shared many laughs, got foot ache, back ache, lost my voice, I got a severe case of larringitus thrown in too, all in the name of a great time at a car show. And where is all this going you may ask?

Well, during the time at that show I was asked so many questions by many people. A few people recorded a conversation via mobiles etc. One notable instance was a nice guy who wanted to take a photo of me with the car and recorded what I was saying. I wasn’t sure what I was thinking at the time, but I agreed and so the photos were taken and his questions were answered. I thought no more of it. That was until a couple of weeks ago, when out of the blue I was contact by a weekly journal called “Classic Car Weekly” here in the UK. A link to their website is here. There was a couple of phone calls and emails to confirm a couple of points. I was asked if I had any photos of the original state, just a few maybe around 4,500 or so at last count. I had to pick a few out to send them of the car during that long build process over the four and a half years it took to complete.

The result is that I featured in this week’s edition of the paper released on the 8th April 2020. If you are quick you might even be able to get a copy. I even made the front cover;

The article is a full page interview and pictures.

The main heading refers to a reveal; where there it is, a picture of me.

To mark the occasion I bought a copy or four, one to read, one to keep prestine and the others just in case.

Now that you know what I look like, please come and say hello if you see me at a car show. That’s of course providing that Corona virus doesn’t keep us locked down and we can actually get to a show this year. I need to drive my car, it’s been five months now – FIVE MONTHS, just sayin’!

Until that next car show, keep safe and stay at home.

UPDATE: 13/4/2020

I have been asked by Richard if I can make a readable version of the article.

As requested here is a high res scan of the article converted to a PDF to download.

Share my Content

Horses for Courses

There is an English proverb which is “Horses  for courses” which basically means different people are suited to different things. I liked the idea of the heading as this car show was held at Newmarket Race Course. I’m certainly not a horse racing fan, but I do have a lot in common with ponies and horses, the original Ford Pony cars and how many horses I can unleash under the hood that is. Anyway, I have had a little surf of the net and found some history of the Newmarket Race Course:

Racing in Newmarket was recorded in the time of James I. Charles II was known to attend races on Newmarket Heath with his brother, the future James II. The first recorded race was a match for £100 between horses owned by Lord Salisbury and Marquess of Buckingham in 1622. The racecourse itself was founded in 1636. Around 1665, Charles inaugurated the Newmarket Town Plate and in 1671 became the first and only reigning monarch to ride a winner.  Up until 1744, the two most valuable races run at the course were the King’s Plate and the Town Plate. Two more Plate races were added in that year, paid for by local traders, both worth 50 guineas (a coin of approximately one quarter ounce of gold that was minted in Great Britain between 1663 and 1814, worth around £1.05p in modern money). The name came from the Guinea region in West Africa, where much of the gold used to make the coins originated- one was a race for five-year-olds carrying 9 stone, one was an open age race in four mile heats. Another paid for by landowners was a four-year-old race over four miles, each carrying 8 stone 7 lbs. At that time, formal races at Newmarket only took place twice a year – once in April, once in October. Since then many, many more big race meets have been added to the calendar making it Britain’s premier race venue.

Newmarket is hugely influenced by the horse racing set, and all the money and trappings that go with it. Some beautiful houses around the town which are some of the most expensive I have seen in the country side with the land that comes with them. Also without a doubt the horses are looked after properly at the race course with rubberised walk ways where the horses walk, the place is spotlessly clean. There is a huge betting presence there to take your hard earned cash from you with plenty of viewing areas, but not as many as thought there would be.

When I was at Elveden Car Show a few weeks ago, I was handed a flier for this event with a lot of hype for new cars, classic cars, children’s entertainment and stalls. This was the second year for the event and was going to be bigger and better than the previous year. I found out that only a handful of classic cars attended last year.

On arrival I was directed in and told to follow the path round to the main display area. Being greeted by another staff member who decided that I was heavy so I wasn’t allowed on the grass, so I was told to park out the front of the main building just on the corner.

After parking up and cleaning the dust of the car after the drive to Newmarket I had a look around the other cars. There wasn’t a lot to look at all, there was however a lot of new cars from sales rooms around the area selling their stock of brand new and used cars. I believe this was the main purpose of the event and the classic were asked to attend in order to get people into the place and provide some other interest.

And there was a very well dressed older gentleman who was the ‘car expert’ there. He said this was the first AC Cobra made and was worth millions.

He was partly correct as the Original AC (chassis number CSX2000) is indeed is worth tens of millions, it was also in left hand drive and it’s certainly not left unguarded at a Newmarket Race Course. However the pretty lady immaculately dressed and dripping with some expensive jewellery, who was about a quarter of his age I reckon, looked (almost) impressed at his knowledge!

The other side of the main building was where the car dealers from all makes who were selling cars at discounted prices and where the majority of the people were to be honest.

Even a few great looking motorbikes were for sale along with a few couple of classics.

There was one car (I think it was a car) that caught my eye from Renault. I did try and get in the ‘car’ but I failed (very) miserably I might add. I got shoes bigger than this car in fact.

There were a few Mustangs there all be it this first one was a statue and not a Mustang from what I could work out from my very limited horse knowledge.

Almost opposite me was me was an Aston Martin race car that previously one its race the week before. a 740bhp ‘detuned’ to 600bhp to allow it to race.

The entertainment was a generous term unless you wanted to eat burgers, have a go on the racing simulator or play the electronic driving range for the golfers out there. Neither of which were exactly busy should we say.

 

The only stalls was a home made sweet stall, a bloke selling a couple of old workshop manuals and the plod with a Porsche GT4 they use. Now I know where my tax paying money goes, not on the maintenance of the roads, oh no. It’s being spent out for these jobsworths so they can sit in flash cars and eat donuts all day! They just wait on slip roads waiting for a motorist doing a couple of miles over the speed limit instead of catching murders, grooming gangs, knife crime and rapists in third world capital city now called ‘Londonistan’! Rant over. Before you say it; no I’m not jealous – I am not a Porsche fan and never have been. Great cars obviously, but they just don’t do anything for me.

As the day wore slowly on after running out of things to look, I wasn’t feeling to well and just sat in my chair, in the shade and reading a free newspaper I was given on my little walk around. I even asked an official if I could leave early as I wasn’t feeling great, but health and safety guidelines said no, I had to stay until 4.30pm. I thought it was just the sun, but it turned into something a bit more for the next couple of days. But to add to my woes the general consensus of the day was they public could sit in the cars of the dealers. The public thought that this applied to the classic cars as well, I had to stop kids pulling on the handles and I made a point of telling one bloke who opened my drivers door before I even locked it, I was getting my chair out the trunk at the time. He had taken of his back pack, dumped it on the floor and was about to get in my car. I told him to pay some respect and to ‘ruck right off’ should we say, those that know me will know exactly what I said. He just didn’t like the idea of me stopping him. One thing was for sure, when it comes to my car, there was no way he was getting in it. His girlfriend did come over to apologise after he walked away. I was not amused and never moved from my perch watching the car at all times when somebody got near it.

On the plus side, have you noticed that I didn’t mention the rain? Well it didn’t rain and the sun was out all day, at long last my rain jinx had been broken. 😀

As there wasn’t a lot to take photos of I tried a few different ideas for a few shots. Where I had parked the car it was a little slope, so if the car looks as though it leaning to one side, it was.

Newmarket Race Course was a lovely place to be, but I doubt I will go back there again. Such a shame, it could have been so much more, it wasn’t as though they didn’t have the room either. I think this last pic sums it up for me. The day had its ups and downs.

Share my Content

A Little Spring Cleaning

Spring cleaning during the winter, in the man cave.

Another weekend left to my own devices and I was able to get on with the seats that I had no intention of starting this weekend. Not sure why I started the seats but it’s probably something to do with the fact that the passenger seat was in the way on the work bench. The original drivers seat had collapsed and a good mechanic friend of mine (Will, from Park Garage) done me a big favour and welded the bits, literally six or so bits back together again for me. A quick lick of coloured paint was applied but I wanted to do it once more fully as I don’t intend to take the seats out again if I can help it that is.

I took this picture at the beginning of the paint process but I thought I would share it as little modern photography. I quite like it, even though it is of a driver’s seat frame!

frame springs
seat frame springs

Anyway, the tracks that were holding the seat in place and allow the frame to move were seized up big time. A little treatment with the Gibbs Brand sorted that out, but the old dried grease needed to be cleaned out as it was contaminated with dirt and other undesirable additives. Once that was done the frame was cleaned down of dust and the very light surface rust removed. I sprayed zinc anti rust self etch primer to the frame and the tracks ready for a black satin finish. The parts that I had taken of from the driver’s seat I also cleaned up and coated with Gibbs Brand ready for fitting back. Two of those bits ,the springs had stuck together and had to be bent slightly in order to free them up and make them flexible again. (Note the tenuous link to the spring cleaning here?) While cleaning the tracks out for the seat I used my home-made “Filler Removing” tool that I had made last week.

Note to Snap On (again): I appreciate you are busy this time of year and that you probably haven’t got round to drawing up the contracts just yet, but I am prepared to wait until the end of the year for a fat wad of cash – or just enough to cover my paint job, otherwise I may have to take my designs elsewhere, then you will be sorry. Obviously I don’t want to offer it elsewhere, but you might be forcing my hand here!

As this latest home-made tool is now obviously a multi-purpose tool, I was thinking of renaming it something more appropriate like: “Specific Corrosion Rust Extractor Workers Device, Removal, Insertion, Varying  Equipment Rod” or “SCREWDRIVER” for short! What do we think? (Ahhh C’mon, it took me ages to come up with that! lol) Any other ideas on what to call this special tool I have made?

The pictures here show the primer and the cleaning in progress before the top coats of satin black.

The second coat was applied in satin black and now looks like new. The rails were greased and now they move smoothly with a single finger.

I have a couple of weeks holiday owing to me over Christmas so I intend to tinker around on the car so I am not sure what I will be doing, but I reckon it will be nothing I have planned! I think I may topcoat the inside of the floor pan, not sure yet though. I may do under the rear seats but I am running out of the POR15 paint unfortunately. I hope Santa has at least a 473ml can for me. I have been a good boy.

Quick Link:

I have added the full set of pictures to the Photos Menu – Inside the Car – Seats, or click here for the hyper link.

Share my Content

Shocked & A Little Hacked off

The weekend has been busy for me again. The wife is so busy I can hardly get on my PC, so I have resulted in using my Galaxy Note 10.1 tab, bluetooth keyboard and a shared internet connection. Everything takes that bit longer unfortunately, but at least I can still work on my blog only at a lower pace. Anyway, as I hadn’t seen Adam for a few weeks I made my monthly pilgrimage to Mustang Maniac, the excuse I made was, “at least I will be out of your way!” With that the “Day Pass” was issued, gratefully accepted by yours truly and I was off. Once I arrived I was speaking to the guys who were showing me the new improvements that were going on to cope with the demands for their work. I believe a blog will be coming out about it soon. After a good few hours of chatting, meeting people coming into the office and watching a few last-minute repairs on a customers car by fitting of some nice LED bulbs to the side lights on a ’66 coupe. I had a wander round the stock rooms. I spotted some rear shocks that had just arrived so nabbed a pair of them pretty sharpish and immediately decided what was going to be my new project for Sunday.

My current shocks were a gas adjustable pair, the only problem is, there is no plumbing for the right hand side and the left hand side is seized solid. I knew these had to be changed regardless, and as the wife was still working, I took tools along with my new shock absorbers out the garage to get some work done. I have written a full process for changing the shocks under Photos Menu – Rear Shock Replacement or click here for the quick link. To cut a long story short, if you pardon the pun, I ended up having to cut one side of the old shock stem off with a hacksaw, in order for me to get it out of the bracket. Not exactly proper mechanics, but as I wasn’t going to keep the old shocks it didn’t really matter. The trouble is it just doesn’t look good with a pair of legs hanging out the front of a garage with that distinctive sound of a hacksaw on metal. The new shocks were a performance rated pair, and according to Adam they are a lot of shock for not a lot of money. On top of that they looked quite good too being all in white. The only thing I could say was that I was worried yet again by the fact that the previous efforts of the “Herbert” to restore this car were a bit of bodge job to say the least. Spanner points rounded off, nuts loose on top of the shocks and at the bottom, old parts just left in the recesses etc. What else am I going to find? Plenty I expect, but don’t worry, I will let you know when I do find something else!

shock41

After all the work was done there is nothing quite like replacing parts that look good and can be seen by somebody else for a change, and above all, these parts will do the job properly. I was well pleased with the weekends work in all. The car no longer bounces like a baby cradle one side and up on stilts the other side. In fact I far from hacked off, even though I had to do some to get the job done. 🙂

Quick Link:

Photo Menu – Rear Shock Replacement click here.

Share my Content

His & Hers

This weekend was a chillaxing weekend for a change and I decided to look at some Classic Cars at a Show in the town of Buntingford (UK), each year the organisers manage close the main street and get the cars all parked up along the narrow road. It was my first time there and I doubt it will be my last either as everybody was quite friendly when talking to them about their cars. It was nice to see families out and not just the petrol heads who needed their octane fix! There were hundreds of different cars there from every era. The war years, modern-day cars, hot rods, trucks, kit cars & bike all gleaming in the sun. While I was at the show I meet Adam from Mustang Maniac who was there with one of their new additions to the garage, a lovely 1965 v8 Coupe. I have taken quite a few pictures but these were the better photo’s from all the cars. What took my eye at the car show? A couple of Cobra replicas that were identical except for under the hood area. One was red the other blue. I could only assume (and would like to think) that they were his and hers!

There were some classic Jaguars

Pre War(s) Cars (I think)

War Years (not so sure about the machine gun though!)

wil

Hot Rods & Trucks

Muscle and Mustangs

Classic UK Cars

Some Of The rest

Review:

I have also completed my TomTom Go 600 SatNav Review which can be found under the accessories menu. I have managed to get the main information together and user guide that most of the other reviews seem to miss out with some photos of it in use. Most reviewers seem to want to trash this SatNav for some reason. But I want something that works and not just have the function to change colours or the shape of an icon for the car – but these people never they never moan when it takes them down a dirt track because it don’t work properly.

My car:

Most of what I have done on the car today has been in man cave, I have been rubbing down some filler trying to achieve that perfect finish for the paint.

Quick Link: TomTom Go 600 review click here

Share my Content

Open and Shut Case

A great weekend for weather and lots got done on the car. To start with I finished replacing the other door hinge pins and re-aligned the doors again. After that I adjusted the hand brake so it now works properly instead of dragging just a little bit! I replaced the steering ram rubber gator that was split and ripped in half. Then on top of all that – I treated the inside under dash with a little more anti-rust treatment. I have placed all the pictures for the hinge pin replacement in the “Photo Menu – Bodywork Section” or click here for the link. Again all these things you will not see but have to be done. I just thought I would share this picture of Mustang with virtually no body work that is totally open the elements, hence the good weather means a day of this sort of thing!

do1

I am going to have a little rant now; If I offend anybody it’s obviously not you that I am referring too. There are a very small percentage of lorry drivers out there who drive dangerously and think they own the road. Before any lorry drivers start getting on their high horse let me explain. The vast majority of lorry drivers are great drivers, it’s a difficult job I appreciate that, it takes a lot of skill and I dare say can be quite boring driving hundreds of miles on motorways all day and night. But boredom is one of the things I want to investigate here. I have to use a main dual carriageway road to get home. To get onto that road it’s via a main down ramp onto the main road with a little slip road. This week coming home there was not many cars on the road and it was just getting dusk, I was on the slip road accelerating up to speed and the lorry was coming up beside me, I was indicating and my lights were on, his were not I might add. Now he didn’t move over to allow me out, there were no other cars the other side of him. He just sat beside me until I almost run out of slip road, I even hooted at him, in the end I had to break and let him past. I should have swerved as soon as I could, that way I would have been in front of him, but that is not nice etiquette for the road. When I pulled out from behind him, still there are no cars close by. I gave him some horn treatment to express my displeasure and indicated via a hand gesture it was not a kind thing, or accepted thing to do. What did he do? Yep, horn back at me, flashing his lights and then started swerving in both lanes! He left his lights on full beam even though other cars were flashing him coming the other way. What was that all about? Now this has happened to me in the past as well and I get really annoyed about it. OK, so it not usually as bad as this performance from this individual who has an IQ the size of his wheel radius, but the not letting me out part I mean is just pathetic. There is a new law that has been passed in the UK that makes it illegal to tailgate now. But, when In slow-moving traffic the lorries sit so far up my ass I get imprints of the number plate on the back of my seat, it’s dangerous so back off! So I have a few points to make 1) My brakes are better than yours for stopping quickly. 2) If you have to stop that quickly the trailer will be out of control and cause an accident. 3) If you don’t react quickly enough you will slam into me, causing an accident. 4) If your tired and don’t notice the traffic you will have an accident. 5) Your forty or forty-four ton lorries will pulverize anything that they hit when you have an accident. 6) You don’t have to swerve out at the last-minute to overtake another lorry that will take you ten minutes to get past, just because you are going a quarter of a mile an hour faster. 7) If my car misfires and slows suddenly you will go into the back of me and cause an accident, probably killing me. Get my point here? Do these bad lorry drivers play these games to give them something to do? I know for a fact that lorry drivers do not want to change gear or slow down, a good friend of mine is a lorry driver and he has told me this many times as it effects the mpg figures. He also admits that there are some very poor drivers out there that give them all bad names. Most of the time if I am slowing to turn off I will flash the lorry in to allow him in front of me, to which I get a thank you back. That is how it should be. But, why do these people do it and make life dangerous? There are eighteen gears in most lorries, if you don’t want to change gear – don’t be a lorry driver. If you want to play life and death – join the army. There are always reports of lorries killing people in accidents, just as there are cars killing people. But with that amount of vehicle and weight, the consequences are that much more dangerous and carnage usually follows. Please give as car drivers a little room, your lorry is not a weapon. I do all I can do avoid you guys and let you get on with your jobs. Don’t get me wrong, there are thousands of lorry drivers out there who are great drivers, let me out fine and I have no issues what so ever. Perhaps the drivers I have issues with are non-UK drivers and their standards are not up to the UK standards. I don’t know, but I am sick of having to play “Road Roulette” with lorries. Apologies to all the good lorry drivers out there, but I just had to get it off my chest. Yes, car drivers are probably just as bad and it could be said about them too. Rant over.

As a result of this I am thinking is it just me? I have created a little poll to get your opinions. Please vote, nothing but the percentages will be displayed.

Quick links:

Door Hinge Pin Replacement – Photos – Bodywork Section – Door Hinge Replacement, or click here.

Share my Content

Unexpected Bouquet Award

There are not many things that cause me to be speechless because I like to think I have an answer (or a point) for most things.  Today was one of those moments. I was nominated for the Bouquet of Three Award! I write my blog about my passion for the restoration of my Mustang and I enjoy doing it. I never expect to receive any award for that reason as it is quite a niche subject, but if anybody takes time out to read my blog then I am grateful that they have kindly given up their time to share my passion. There are some really great blogs out there and I was lucky enough to find a great blog by Alicia Benton http://aliciabenton.wordpress.com/ Her blog has made me laugh, reflect on and look at things from a slightly different perspective too; it really is worth stopping by to have read. I am humbled to be nominated for this award. I would honestly nominated the award to Alicia if she hadn’t already got it.

Thank you Alicia so very much.

Here are the rules:

1. Proudly display the Award Certificate on your blog page!

2. Announce your win with a post.  Be sure to link your post back to me as a “thank you” for the nomination.

3. Present up to 15 awards to fellow deserving bloggers.

4. Let them know you’ve nominated them for this awesome award.

5. Post 7 interesting things about yourself.

There are nearly 50 plus blogs that I follow and I wish I could give them all an award. But I am restricted of course, so it is a difficult decision I must choose, but here goes –

My nominations in no particular order are as follows:

http://hoodscoop03.com/ – I love this blog and we have become good friends through our mutual love of cars.

http://ronscubadiver.wordpress.com/ – This guy has a true talent for photography and wouldn’t mind parting with money for some of his photos. My favourite photography blog.

http://karengadient.com/ – This is a refreshing bright and colourful blog that keeps me coming back for more.

http://cruisin2.wordpress.com/ – This blog makes me think, I don’t always agree with everything he says, but is that not the point to make us think? A great blog

http://dr1ven.wordpress.com/ – A great petrol heads blog. A wide variety of subjects keeps me informed and educated.

http://julieriso.wordpress.com/ – A great blog to travel around the world with some great posts.

http://suellewellyn2011.wordpress.com/ – Another great around the world blog, photos and posts are top quality.

http://quattroporte3.wordpress.com/ – I have only been following this blog for a little while and it does inspire me, when I think I am grinding to a halt I can see the hard work that has gone into this guys hard work. I can really relate to it.

http://www.rodalena.com/ – A bright refreshing and informative blog, I’m not sure why I like this blog but I do, but it’s a Well written blog.

http://f1superswede.wordpress.com/ – I love the Formula 1 racing and this guy gives me everything I need, if I miss a race and I need to catch up – this is where I will be.

http://thejigglybits.com/ – This is a great blog and cheers me up no end. Well written and I look forward to the posts.

http://theverybesttop10.com/ – This guy has awards all over the place and it’s easy to see why. A few more won’t hurt.

http://superkonr.wordpress.com/ – A blog dedicated to restoring a classic Mustang.

http://oversteergarage.com/ – A varied video blog of all great American cars.

http://atlastracer.wordpress.com/ – Another great travel blog with some great photos.

Seven Interesting Facts about me:

1) I polish my tools before I put them all away in my polished tool chest

2) I have a sleep disorder where I wake up at least once every night

3) I love gadgets

4) I read the manuals for all the stuff I buy except when I make a flat pack of something. It’s a man thing!

5) I made myself sick once by go-karting for to long without a break

6) I have fallen asleep in shop doorway in London after a heavy night on the town. I woke up with some small change in my lap!

7) I honestly like the Nick Cage movie –  Gone In 60 Seconds

Share my Content

Actions or Words?

So here we are in the UK and we are in the grip of a heat wave and we are not happy. People I have spoken to are moaning about the heat, a few weeks ago they were moaning about the fact our summer hadn’t started yet. Now we have some glorious weather I am trying to make the most of it but don’t understand why people moan so much. This sunny weather has  allowed me to be sanding down my front valance, my radiator valance etc. all outside without having to stand in a dust cloud in the man cave. I have been in the garden with the new flower bed and watching the bee’s enjoy life as much as I am enjoying doing bits on the car outside. I have found a patch in the garden where the wind is hardly noticeable and the sun is not directly on you. This area is perfect for spraying car parts with primer and rust treatment. I was using this area to its full potential over most of the weekend much to my satisfaction. The only down side is the wife don’t like it. The patch which looks like deformed Olympic rings again in grey and black, is unfortunately directly in front of the kitchen window out the front of my man cave. When the wife returned home to see how much I had done with my spray job she didn’t look happy. When I moved the parts to show her workmanship, the attention rapidly moved to the now multi coloured grass. That look (again) was flashed in my direction. All I could think of to say was “That will go when you next cut the grass”. I’m glad I wasn’t hungry that night; I think she forgot me! When I mentioned the fact that there seemed to be a meal missing I was greeted with, “You can make some toast if you cut the bread”. I have now found another shower curtain to spread on the grass so that I don’t make a mess. Sometimes no actions can speak louder than words. Babe, you win!

Over the weekend I went down to see the boys at Mustang Maniac and got a few bits and pieces.  I was talking about the fact I needed an exhaust system and Adam asked me about the headers on the car. To cut a long story short it turns out that the headers I have are so close to the steering ram they have damaged the rubber gator. As a result I was told I should replace the original bracket with an extension bracket that moves the ram out of harms way. I fitted the part on over the weekend and placed a photo guide on how to do it under the Photos menus – Steering. It really has made a difference.

buffers and plates in place
bracket and steering ram in place

Recently I have had a couple of nice emails asking about the brakes on the car and if I had a guide. Well yes, I have books that I have reviewed and I also have a few diagrams I keep in plastic wallets for reference of the bits I need. I even coloured in the black and white diagram with the colours of the springs and where they should be, it took me all of about one minute in Photoshop. All of the various diagrams I used can be found under the Articles menu – Front & Rear Brake Diagrams.

Drum Brakes spring guide

Enjoy the weather while you can and keep up the sun screen.

Quick Links:

Steering and Header Spacing click here

Front and Rear Brake diagrams click here

Share my Content

It’s in the can

Keepin’ the stock look

What is he bangin’ on about? Yesterday I spent a few hours down at Mustang Maniac where I was talking to Adam about my next project and what I needed, that project being my wiper motor. It turns out that my two-speed motor is like trying to find mermaid tears in the ocean. It seems a total nightmare, but Adam is on the case so I will just have to wait and see what happens. While I was down there I also took my power steering pump and we had a look at the issues, the main one being that the pump is more interested in squirting fluid out the seal than it should be pumping out the back into the steering ram! It turns out that the last Air Con version pump was fitted to another car and I was going to be without. But that wasn’t a problem for Adam as he said “I will swap the “cans” over for you, it will be better than a new one.” This entailed taking the old case of my pump, and putting it straight onto the new upright filler tube version.  The correct pump was found with the in line fittings and we went off to the workshops with a couple of pumps and the usual escort of guard dogs. I was told that the fitting for the pulley was an “interference fit”, this was new one on me. It turns out that interference fit is where the bore is microns smaller than the shaft and so its a real tight fit, no key ways are used.  The special tool was found and I was shown how to do it. There is no way that any of my tools would have done it without damaging the pulley wheel or damaging the case. Watching intently the process took no more than twenty minutes which included me saying “hang on, I want a picture of that”. The cans were swapped over, an I still have the original case and tag under the hood from the original factory fit and not a reconditioned one. How’s that for customer service? I have added the full process to the existing guide, click here, or go to the photos, Engine bay – Power Steering Pump project.

Fitting the tool in place
Fitting the removal tool in place

As we were walking around I was shown around the new additions to the yard. I was shown a customer car that was a complete nightmare that was purchased in good faith, but turned out to be a mess and was in need of some serious TLC. Speaking to Adam he will post his set of pics on the blog when he gets a few minutes. There is also some news he will post about a car he has just bought. I was going to spill the beans but you will just have to wait and see on his blog what it is. It’s a little bit special shall we say.

I got round to bleeding the front brakes today and I can say – I have a pedal. Ohhh, yeah baby! I press the pedal the drums stop, the fluid don’t come out. The pedal don’t go all the way down to the bulk head now and there is resistance. I started off with the Sealey vacuum tool, (review to foloow very soon), then when the final air was out the tried and trusted pipe in a pot method was to be used. All I can say is thanks to the wife who sat there pressing the pedal to command. I did say it will only take two minutes, but as I have a clock in the garage I was constantly reminded of how many minutes had elapsed since she got in the car. The funny side is that as I have no seat in the car, all I could see was a pair of eyes looking over the top of the door sill when I got back up to top the reservoir up again. I wasn’t laughin’ much, honestly darling. Next Weekend I will put more fuel in the car and reverse it out of the garage and drive it back in.

That will be a big day for me if it works, I may just have to get a beer out to celebrate or I will be crying in my beer!

Quick links:

Power Steering Pump Project, click here.

Just in case you need the blog address, I have the link to the right or click here:  http://mustangmaniac.org or go to my Mustang Links Tab.

Share my Content